Iso-Tip offers a full line of butane powered soldering irons in addition to our battery powered soldering irons.

  • Model #7971 Pro 50 Butane Soldering Iron
  • Model #7977 Pro 120 Butane Soldering Iron
  • Model #9010 Pro 90 Butane Soldering Iron and Kit

For more information about each butane powered soldering iron, continue reading below or click here to view the catalog and buy.


Pro 50 Butane Powered Soldering Iron

7971

Our first tool is one of our number one selling products. Because of its long usage life up-to 30 minutes of continuous use it can do just about anything you could need. With multiple tips ranging from blow torches and heat shields to fine soldering tips for those small jobs. All while maintaining a small size of just 6 inches. This allows the Pro 50 to fit perfectly in most pockets for jobs on the go. With a rating of 30W to 70W you can use the Pro 50 for all general purpose soldering wire.

 

For more information about the Pro 50, click here to view the product page and buy!

Pro 120 Butane Soldering IronIso-Tip Pro 120 Butane Soldering Iron Kit – Model #7977

The Pro 120 is our biggest and most powerful butane powered soldering iron. With a rating of 30W to 125W this iron can truly do it all. It is capable of running for over 3 hours on a single fill. The Pro 120 comes with two standard tips, the soldering and blowtorch tip, you can complete any job with a Pro 120 from small sensitive electronics to a brazing a large pipe the uses are limit less. Joe likes to fire up his cigars with the blow torch. 

Click here to learn more and buy yours today!

Pro 90 Butane Soldering Iron Kit

Meet the latest and greatest member of our family – The Pro 90 a butane powered iron. It comes in a hard shell case with a hard foam insert to keep everything in place. The Pro 90 soldering kit comes with everything you’ll need including a sponge, solder wire coil, four tips and of course the iron itself. The first tip is a torch style tip use it for brazing or to satisfy your pyro side. Our next is a hot knife perfect for cutting any synthetic material, such as foams and polymers because it seals as it cuts. There is also a 2.4mm chisel and 1mm conical soldering tip. Our Pro 90 is rated at 25W to 80W and a 55 minute run time. This makes the Pro 90 the perfect bridge between small tools and big jobs. 

Learn more about our butane tool kit by clicking here!